SB4011-Series Miniature Pushbutton Switches

SB4011-Series Miniature Pushbutton Switches
3A Power Level & 0.4VA Logic Level; Bushing Mount, UL, CSA, cULus

Single-throw Double Break

Optional caps in different colors to vary appearance as needed. Low operating force for easy actuation. Rear panel bushing mount with compact behind-panel dimension. Internal anti-jamming feature  protects the contacts from damage caused by excessive force on the plunger. Low-cost device of rugged one-piece bushing and housing construction. Reliability of construction with an internal guide to maintain contact alignment. Epoxy sealed terminals.  

View Parts for SB4011-Series

SCB-Series Standard Pushbutton Switches

SCB-Series Standard Pushbutton Switches
15A Power Level; Bushing Mount, Snap Switch Superstructure, UL, CSA

Snap-switch Pushbutton Switches

A variety of five mounting kits give the option of small, medium, and large diameter caps, plus cap-and-shroud combinations in round and rectangular shapes. Series SCB uses a superstructure assembly in combination with the snap switch to allow for use in bushing mount applications. The 12mm bushing is designed for panel-mount applications; mounting hardware is included with each switch. These switches come in high capacity models with ratings of 15A @125V AC. Sturdy construction and offered with plastic or zinc-plated steel bushing. Single and double pole models with both momentary and alternate action circuit functions. .187" or .250" quick connect terminals are available.

View Parts for SCB-Series

UB Series Low Profile Pushbutton Switches

UB Series Low Profile Pushbutton Switches
5A Power Level & 0.4VA Logic Level; Snap-in and PCB Mount; Square and Rectangular Cap Options; UL, CSA, cULus

Low Profile Pushbutton Switches

  Combination of PCB mountability and short body allows use in compact applications. Small behind panel dimensions for snap-in mounting in tight spaces. Snap-acting contact mechanism provides sensitive actuation with audible feedback; quick-make, quick-break characteristic limits arcing and prolongs electrical life. Latchdown mechanism, independent of switching mechanism, gives outstanding stability and reliability plus visible and tactile indication of circuit status. Terminals are epoxy sealed to lock out flux, solvents, and other contaminants. Momentary and alternate action circuits available in the same space-saving body size.

View Parts for UB Series Low Profile Pushbutton Switches-Series

UB2 Series Low Profile Pushbutton Switches

UB2 Series Low Profile Pushbutton Switches
5A Power Level & 0.4VA Logic Level; Snap-in and PCB Mount; Sculptured and Beveled Cap Options; UL, cULus

Low Profile Pushbutton Switches

  Combination of PCB mountability and short body allows use in compact applications. Small behind panel dimensions for snap-in mounting in tight spaces. Snap-acting contact mechanism provides sensitive actuation with audible feedback; quick-make, quick-break characteristic limits arcing and prolongs electrical life. Latchdown mechanism, independent of switching mechanism, gives outstanding stability and reliability plus visible and tactile indication of circuit status. Terminals are epoxy sealed to lock out flux, solvents, and other contaminants. Momentary and alternate action circuits available in the same space-saving body size.

View Parts for UB2 Series Low Profile Pushbutton Switches-Series

WB Series Environmentally Sealed Pushbutton Switches

WB Series Environmentally Sealed Pushbutton Switches
6A Power Level; Bushing Mount, Environmentally Sealed, IP67, Optional Wire Leads

Environmentally Sealed Pushbutton Switches

Available in 10A toggles, 6A pushbuttons and in 15A rockers. Antijamming design on toggle switches protects contacts from damage due to excessive downward force on the actuator. Sealed construction conforms to IP67 of IEC529 Standards and allows use in outdoor or harsh applications. Single unit construction of the bushing and top of the housing gives added protection from environmental elements. Specially designed switching mechanism for breaking light welds qualifies these switches to IEC 61058 (UL 61058-1). Sealed actuator area and epoxy sealed base prevent entry of contaminants. Minimal contact bounce is achieved with specially designed interlocked switching mechanism. Outer housing of heat resistant resin meets UL 94V-0 flammability standard and provides high arc and tracking resistance.

View Parts for WB Series Environmentally Sealed Pushbutton Switches-Series

YB Series Short Body Pushbutton Switches

YB Series Short Body Pushbutton Switches
3A Power Level & 0.4VA Logic Level; Snap-in and Bushing Mount; Square, Round and Rectangular Cap Options; IP65 Options, UL, CSA, cULus

Short Body Pushbutton Switches

Full face or spot illumination with incandescent lamps or multi-element LEDs, with or without resistors. Choice of super bright LEDs in white, green, and blue or bright red, amber, and green LEDs. Nonilluminated models available. Unique thermoplastic elastomer seal inside caps plus rolled sleeve of nitrile butadiene rubberat joining of housing and inner case, all for added protection to interior mechanism. Dust and oil tight as well as splashproof panel seal models qualifiy to IP65 of IEC529 Standards (similar to NEMA 4 and 13). Panel seal models provided with exterior o-ring. Distinctive design of snap-action contacts for shock resistance, long life and sensitive actuation. High density design to give behind panel depth of less than one inch. Terminals are epoxy sealed to lock out flux, dust, solvents and other contaminants. Latchdown for indication of circuit status, plus audible, tactile feedback with smooth, responsive operation.

View Parts for YB Series Short Body Pushbutton Switches-Series

YB2 Series Panel Seal Pushbutton Switches

YB2 Series Panel Seal Pushbutton Switches
3A Power Level & 0.4VA Logic Level; Bushing Mount; IP65, cULus

Panel Seal Pushbuttons

24mm square and 25mm diameter pushbuttons with the shortest above-panel dimension (1.8mm) in the industry for splashproof design. Meets IP65 of IEC60529 standards (similar to NEMA 4 and 13), providing dust tight and splashproof panel seal protection. Tamper resistant 18mm square and 19mm diameter actuators. Short body of .965” (24.5mm) conserves behind-panel space. Distinctive long stroke and light touch actuation for clear indication of circuit status. Choice of cap colors includes clear, brushed chrome, red, green, or amber, for enhanced panel appearance. Metallic silver cap option has bright ring illumination (round only). Brilliant illumination with multiple LED colors. Bezel color options in black or brushed chrome. Brushed chrome option is lighter weight than actual metal switches due to metal plating on resin. Available in momentary and alternate action with latchdown. Crisp actuation and clear circuit status provided by snap-action contact mechanism. Arc barrier protects against crossover. Combination solder lug and .110” quick connect terminals. Terminals are epoxy sealed to lock out flux, dust, solvents, and other contaminants, as well as to secure terminals and improve contact stability. Custom legends on actuator available.

View Parts for YB2 Series Panel Seal Pushbutton Switches-Series