CB-Series Ultra-Miniature Tactile Switches

CB-Series Ultra-Miniature Tactile Switches
50mA Low/Logic Level; Process Sealed, Straight PCB Mount

6mm Washable Tactile Switches

Fully sealed construction prevents contact contamination, and allows for automated soldering and washing. 6.2mm square body allows for compact mounting for through-hole and surface mount. Dome contact gives crisp tactile feedback to positively indicate circuit transfer, and assures high reliability and long life of more than 100,000 operations. Gull-winged terminals for SMD ensure mechanical stability during soldering, and simplify solder-joint inspection. Crimped terminals ensure secure through-hole mounting and prevent dislodgment during wave soldering. Insert-molded terminals lock out flux, solvents, and other contaminants.

View Parts for CB-Series

HP02-Series Subminiature Tactile Switches

HP02-Series Subminiature Tactile Switches
3VA DC and & 0.4VA Low/Logic Level; Straight PCB Mount

6mm Eco-friendly Tactile Switches

Environmentally friendly, lead-free component construction. Components and packaging materials meet RoHS directive restricting use of hazardous mounting substances such as lead and cadmium. .244" (6.2mm) square body allows compact mounting. Heat-resistant resin body meets lead-free solder processing requirements and UL flammability rating of 94V-0. Stick-tube and tape-reel packaging allow for rapid automated placement of devices. Gold-plated contacts for very low voltage/current applications offer advantages of little or no oxidization or sulfurization and stable contact resistance. Crimped PC terminals for through-hole models provide a spring-type action that ensures secure mounting and prevents dislodgment during automated soldering. Gull-winged terminals for SMT devices ensure mechanical stability during soldering and simplified solder-joint inspection. Insert molded terminals lock out flux, solvents, and other contaminants and allow automated soldering. SMT packaging meets EIA Standard 481-2. Coplanarity tolerance zone is .0039" (0.1mm) maximum; the allowable distance between all considered surfaces in two parallel planes (for SMT models).

View Parts for HP02-Series

JB-Series Low Profile Process Sealed Tactiles

JB-Series Low Profile Process Sealed Tactiles
50mA or 125mA Low/Logic Level; Process Sealed, Straight and Right Angle PCB Mount

Low Profile Process Sealed Tactiles

Special bracket for right-angle mounting provides added design variations.

Choice of dimensions from PCB to top of cap adds to design flexibility. Higher operating force type provides more pronounced operating feel. Dome contact gives crisp tactile feedback to positively indicate circuit transfer and assures high reliability and long life of up to 5,000,000 operations. Rubber seal construction prevents contact contamination and allows automated soldering and washing. Slanted terminals provide a spring-type action, which ensures secure mounting and prevents dislodgment during wave soldering. Molded-in terminals are part of the sealed construction that allows for automated soldering and washing. Terminal spacing conforms to standard 2.54mm PCB grid.    

View Parts for JB-Series

JF-Series Ultra-Thin Process Sealed Tactiles

JF-Series Ultra-Thin Process Sealed Tactiles
50mA Low/Logic Level; Process Sealed, PCB Mount, Many Actuator Options, Light Touch

Ultra-Thin Process Sealed Tactiles

Extremely low profile of 5mm from PCB to top of switch. Fully sealed contact mechanism permits wave soldering and washing. Minimal operating force and short stroke permits light-touch operation. Dome contact gives crisp tactile and audible feedback to positively indicate circuit transfer and assures high reliability and long life. Wide choice of body shapes and colors. Crimped terminals provide a spring-type action to ensure secure mounting and prevent dislodging during wave soldering. Space saving body dimensions provide for compact, side-by-side mounting on a standard grid. Terminal spacing conforms to standard .100" PCB grid.  

View Parts for JF-Series