Protective Polyurethane Splashproof Overlay for SmartDisplay

Protective Polyurethane Splashproof Overlay for SmartDisplay

Can be used to provide increased protection to SmartDisplay or any products requiring added protection. IP65 rating can be achieved...

[+] Expand

Can be used to provide increased protection to SmartDisplay or any products requiring added protection.
  • IP65 rating can be achieved with proper installation of overlay and added bracket.
  • For custom sizes, contact [email protected]
  • Standard size overlays are available to cover typical size configurations of SmartDisplay. 4x4 (125mm x 115mm) 1x2 (80mm x 53mm) 2x2 (80mm x 74mm) 1x1 (55mm x 53mm)

[-] Collapse

IS-SPA1X2A - Overlay, 1x2 package of two

IS-SPA2X2A - Overlay, 2x2 package of two

IS-SPA1X1A - Overlay, 1x1 package of two

Engineering Development Kits – LCD and OLED Programmable Kits

Engineering Development Kits – LCD and OLED Programmable Kits

Engineering Development Kits – LCD and OLED Programmable Kits Controls up to two SmartDisplays or one OLED Rocker. 1M or...

[+] Expand

Engineering Development Kits – LCD and OLED Programmable Kits
  • Controls up to two SmartDisplays or one OLED Rocker.
  • 1M or 16M on-board NOR flash memory to store images, attributes or any other information.
  • Serial communication via USB (115.2K, 1 start bit, 8-bit, 1 stop bit).
  • Additional serial communication via UART connector available for Arduino/Raspberry Pi/Microcontroller interface (on OLED Engineering Kits only)
  • IS-ENG-KIT-7-DS, IS-ENG-KIT-7-FS, IS-ENG-KIT-7-FF, IS-ENG-KIT-8-R, IS-ENG-KIT-6-DH, IS-ENG-KIT-6-SH, IS-ENG-KIT-6-CH, IS-ENG-KIT-5-DC, IS-ENG-KIT-5-SC, IS-ENG-KIT-5-BC.

[-] Collapse

OLED - IS-ENG-KIT-7-DS

LCD 64x32 - IS-ENG-KIT-6-DH

LCD 64x32 - IS-ENG-KIT-6-SH

LCD 64x32 - IS-ENG-KIT-6-CH

LCD 36x24 - IS-ENG-KIT-5-DC

LCD 36x24 - IS-ENG-KIT-5-SC

LCD 36x24 - IS-ENG-KIT-5-BC

FT-Series Four-Wire Analog Resistive Touch Screens with FPC Tail
Four-Wire Analog Resistive Touch Screens with FPC Tail
  • Expansion of FT Series includes wider, larger, narrow frame types with FPC tails, offering increased continuity and reliability.
  • Touch screens support flexible design, including digital and analog, in a variety of sizes and relatively low cost.
  • Adhesive layer between glass and film has improved durability to withstand diverse environmental conditions.
  • Operator can easily direct the device without specialized technical training or computer knowledge by combining touch screen to LCD panel, plasma EL or other display.

View Parts for FT-Series

LP01-Series Spot Illuminated Pushbutton Switches

LP01-Series Spot Illuminated Pushbutton Switches
LP01-Series Spot Illuminated Pushbutton Switches
  • Vivid, super bright LED spot illumination in red, amber or green provides easy status recognition.
  • Smooth, slightly concave surface of cap designed to fit fingertip. Unique design and construction of cap prevents its removal and limits tampering.
  • Short body of .551” (14.0mm) conserves behind-panel space.
  • Combination solder lug and .110” quick connect terminals are epoxy sealed to prevent entry of flux, dust, other contaminants.

View Parts for LP01-Series