FP01-Series Contactless Illuminated Pushbutton Switches

FP01-Series Contactless Illuminated Pushbutton Switches
Photo Interrupter; Snap-in Mount, LED Illumination, 3 Million Actuations

Contactless Illuminated Pushbutton Switches

Brilliant illumination for highly visible status indication with LEDs and caps in red, green, or amber; subdued illumination for low light requirements with white cap over red, green, or amber LEDs. Photo interrupter, rather than contacts, ensures high reliability and long life of 3 million operations minimum. Rugged construction and smooth actuation allow repeated, rapid actuation force anywhere on cap surface. Snap-in mounting for easy installation. Connector socket with 6 pins for simple connection. Well suited for gaming and vending machines, as well as equipment exposed to corrosive gases used in environments such as chemical or steel manufacturing plants.

View Parts for FP01-Series

HB-Series Subminiature Illuminated Pushbutton Switches

HB-Series Subminiature Illuminated Pushbutton Switches
100mA Power Level; Bushing Mount, LED Illumination, Spot or Full Face Illumination, Round or Square Cap, UL, cULus

Subminiature Pushbutton Switches

Full face and spot illumination available. Front panel relamping. Choice of super bright LEDs in white, green, and blue in addition to bright red, amber, and green LEDs. Non-illuminated models available. Compact front-panel design with .354" square or round bezel. Rear panel threaded mounting. Behind-panel depth of less than one inch. 8mm (.315") body diameter fits common size panel cutout. Latch-down feature gives indication of circuit status. Audible and tactile feedback with smooth and responsive operation. Dual sliding contacts with self-cleaning action provide contact stability, high reliability, and increased operating life. Solder-lug terminals have spacing of .100" for choice of mounting. Longer normally closed terminal facilitates wiring and soldering. Molded-in terminals lock out flux, dust, and other contaminants.  

View Parts for HB-Series

HB2-Series Subminiature Illuminated Pushbutton Switches

HB2-Series Subminiature Illuminated Pushbutton Switches
0.4VA Logic Level; PCB Mount, Bicolor LED Illumination. Quiet actuation combined with crisp tactile feedback suited for broadcast equipment. Full-face illumination with choice of red/green or red/yellow bicolor LEDs, as well as simultaneous bicolor illumination which produces amber. Option of legends on caps or film insert. Compact design with short body 17.0mm (.669") from PCB to top of cap and 7.5mm (.295") square cap. Sliding Twin Crossbar (STC) mechanism provides unequalled logic-level reliability, contact stability, smooth positive detent actuation, and long life. Crimped power terminals ensure secure PCB mounting and prevent dislodgment during soldering. Suitable applications include broadcast, telecommunication, and medical equipment, as well as measuring instruments, etc.

View Parts for HB2-Series

KB-Series Miniature Illuminated Pushbutton Switches

KB-Series Miniature Illuminated Pushbutton Switches
Miniature Pushbutton Switches
  • 1A Power Level & 0.4VA Logic Level; Snap-in and Bushing Mount; Incandescent, Neon and LED Illumination; Square, Round and Rectangular Cap Options, UL, CSA, cULus
  • Bright illumination with numerous color variations. Spot illumination available. Square, rectangular, and round shaped caps.
  • Incandescent, LED, and neon lamps. Front panel relamping.
  • Choice of super bright LEDs in white, green,and blue, or red, amber, and green bright LEDs.
 

View Parts for KB-Series

KP-Series Miniature Audio/Video Illuminated Pushbutton Switches

KP-Series Miniature Audio/Video Illuminated Pushbutton Switches
Miniature Audio/Video Pushbuttons
  • 100mA Logic Level; PCB Mount; Bicolor and RGB LED Illumination; Flat, Sculptured and Home Key Caps
  • Complete switch solution for all broadcast panel needs, including home keys and the custom rectangular switch/cap assembly.
  • Distinct, long total travel of .177" (4.5mm) for KP01 or shorter stroke of .138" (3.5mm) for KP02.
  • Available with red/green bicolor LED and custom RGB LEDs full color spectrum.
 

View Parts for KP-Series

LB-Series Standard Illuminated Pushbutton Switches

LB-Series Standard Illuminated Pushbutton Switches
3A Power Level & 0.4VA Logic Level; Snap-in and Bushing Mount; Incandescent, Neon and LED Illumination; Square, Round and Rectangular Cap Options; IP65 Options, UL, CSA, cULus

Standard Size Pushbutton Switches

Carefully designed light diffusion and filtering system produces bright, full surface illumination with front panel relamping. Spot illumination available in single and bicolor LEDs. Choice of super bright LEDs in white, green, and blue in addition to standard or bright red, amber, and green LEDs. Non-illuminated models available. Stainless-steel clips provide secure mounting with a wide range of panel thicknesses. Latch-down feature gives indication of circuit status. Audible and tactile feedback with smooth and responsive operation. Snap-action contact mechanism gives long electrical life and sensitivity of actuation. Combination solder lug and .110" quick connect terminals are epoxy sealed to prevent entry of flux, dust and other contaminants. Panel sealed model meets IP 65 of IEC 529 specifications (similar to NEMA 4 & 13). Compact switch design minimizes behind panel depth.

View Parts for LB-Series

LP01-Series Short Body Illuminated Pushbutton Switches

LP01-Series Short Body Illuminated Pushbutton Switches
Short Body Illuminated Pushbutton Switches
  • 3A Power Level; Snap-in and Bushing Mount, LED Illumination, Tamper Resistant Cap, UL, cULus
  • Illuminated/non-illuminated
  • Environmentally friendly components and packaging materials meet RoHS Directive restricting use of hazardous materials. Suited for lead-free soldering because of heat-resistant resin materials.
  • Smooth, slightly concave surface of cap designed to fit fingertip. Unique design and construction of cap prevents its removal and limits tampering.
 

View Parts for LP01-Series

NP01-Series Subminiature Smooth Actuation Illuminated Pushbutton Switches

NP01-Series Subminiature Smooth Actuation Illuminated Pushbutton Switches
Subminiature Smooth Actuation Pushbuttons
  • 0.4VA Logic Level; PCB Mount; Single and Bicolor LED Illumination; Soft Touch Actuation, Alternating Legend Options
  • Soft-touch actuation achieved by mechanical silicon rubber structure (patent pending).
  • Distinct, long stroke of 1.5mm (.059”).
  • Entire cap is fully illuminated with single or bicolor LED.
     

View Parts for NP01-Series

UB-Series Low Profile Illuminated Pushbutton Switches

UB-Series Low Profile Illuminated Pushbutton Switches
Low Profile Pushbutton Switches
  • 5A Power Level & 0.4VA Logic Level; Snap-in and PCB Mount; LED Illumination; Square and Rectangular Cap Options; Full Face and Spot Illumination, UL, CSA, cULus
  • Wide selection of illumination effects is achieved with single and bicolor LEDs, in flat, beveled, or sculptured caps. LED colors include red, amber, green, white, blue, and orange.
  • Non-illuminated models available.
  • Combination of PCB mountability and short body allows for use in compact applications.
 

View Parts for UB-Series

UB2-Series Low Profile Illuminated Pushbutton Switches

UB2-Series Low Profile Illuminated Pushbutton Switches
Low Profile Illuminated Pushbutton Switches
  • 5A Power Level & 0.4VA Logic Level; Snap-in and PCB Mount; Single and Bicolor LED Illumination; Sculptured, Beveled and Flat Cap Options; Alternating Legend Options; UL, cULus
  • Wide selection of illumination effects is achieved with single and bicolor LEDs, in flat, beveled, or sculptured caps. LED colors include red, amber, green, white, blue, and orange.
  • Non-illuminated models available.
  • Combination of PCB mountability and short body allows for use in compact applications.
 

View Parts for UB2-Series

YB-Series Short Body Illuminated Pushbutton Switches

YB-Series Short Body Illuminated Pushbutton Switches
Short Body Illuminated Pushbutton Switches
  • 3A Power Level & 0.4VA Logic Level; Snap-in and Bushing Mount; Single and Bicolor LED Illumination; Square, Round and Rectangular Cap Options; IP65 Options, UL, CSA, cULus
  • Full face or spot illumination with incandescent lamps or multi-element LEDs, with or without resistors.
  • Choice of super-bright LEDs in white, green, and blue or bright red, amber, and green LEDs.
  • Non-illuminated models available.
   

View Parts for YB-Series

YB2-Series Panel Seal Illuminated Pushbutton Switches

YB2-Series Panel Seal Illuminated Pushbutton Switches
Panel Seal Illuminated Pushbuttons
  • 3A Power Level & 0.4VA Logic Level; Bushing Mount; LED Illumination; Full Face and Illuminated Ring Options, IP65, cULus
  • 24mm square and 25mm diameter pushbuttons with the shortest above-panel dimension (1.8mm) in the industry for splash-proof design.
  • Meets IP65 of IEC60529 standards (similar to NEMA 4 and 13), providing dust-tight and splash-proof panel seal protection.
  • Tamper-resistant 18mm square and 19mm diameter actuators.
 

View Parts for YB2-Series